It is recommended to be used at the compressor outlet or before the dryer. It is used to discharge condensate/water droplets and particles formed as a result of pressure and temperature changes in the compressed air installation.
• Automatic condensate drain is integrated.
• By creating uninterrupted centrifugal force, waste is discharged with a very low pressure difference, thus providing maximum energy saving.
• Thanks to the Water Separator, problems such as corrosion, air leaks and valve jamming that may occur in pneumatic systems are prevented.
• High efficiency water separators cannot filter all the oil in compressed air, CFS or GFS series pre-filter, final-filter and carbon-filter should be used additionally for quality compressed air.
Model | Nom. Capacity | Connection | Max. Working Pressure (barg) | Body Material | Width x Height(mm) | Weight (kg) | |
(m3/min) | (cfm) | ||||||
WSS 7 | 0.7 | 24.7 | ½” | 16 | Aluminum | 96×278 | 1.3 |
WSS 12 | 1.2 | 42.3 | ½” | 16 | Aluminum | 96×377 | 1.3 |
WSS 23 | 2.3 | 81.2 | ¾” | 16 | Aluminum | 124×354 | 2.5 |
WSS 37 | 3.7 | 130.6 | one” | 16 | Aluminum | 124×415 | 2.9 |
WSS 55 | 5.5 | 194.2 | one” | 16 | Aluminum | 124×501 | 3.3 |
WSS 65 | 6.5 | 229.2 | 1 ½” | 16 | Aluminum | 124×501 | 3.7 |
WSS 110 | 11.0 | 388.4 | 2″ | 16 | Aluminum | 160×674 | 7.9 |
WSS 220 | 22.0 | 776.9 | 2 ½” | 16 | Aluminum | 272×786 | 23 |
WSS 260 | 26.0 | 918.1 | 3” | 16 | Aluminum | 272×786 | 23 |
WSS 350 | 35.0 | 1,236.0 | 3” | 16 | Aluminum | 272×786 | 25 |
WSS 450 | 45.0 | 1,589.1 | 3” | 16 | Aluminum | 272×986 | 35 |
WSS 500 | 50.0 | 1,765.7 | DN150 | 16 | Aluminum | 730×1280 | 80 |
WSS 600 | 60.0 | 2,118.9 | DN150 | 16 | Aluminum | 750×1300 | 90 |
Piping Material Features Comparison |
|||
Piping Features | Stainless Steel(Type 304L) | Mild Steel | Blue anodized Aluminum Alloy |
Weight (Dia 6inch, Length 6m) | 127.2 | 169.6 | 29.142 |
Corrosion Resistant | Yes | No | Yes(100%) |
Pressure drop (Dia 2 inch Length= 20m,Airflow=3 cubic metres/Minute, Pressure=10 bar) | 0.25 | 0.4 Bar | 0.1 |
Energy Efficiency | High | Low-moderate | High( Potential Cost savings of 34%) |
Mechanical Strength | Very Strong | Very Strong | Strong |
High-Temperature Rating | Yes | Yes | Yes |
Installation Ease | Less Difficult | Difficult | Easy(High Flexibility and Modularity) |
Installation Time | Approx 6 feet length per hour | Approx 6 feet length per hour | Approx 45 feet Length per hour |
Work Hours/Manpower Required for a 2″ pipe and a 3000 feet piping | Approx 600 man-hours/8 men for 2 weeks | Approx 600 man-hours/8 men for 2 weeks | Approx 100 man-hours /8 men for less than 2 days |
Annual Cost(Installation, Commissioning, and operation) | Approx 3000 dollars | Approx 7820 dollars | Approx 1300 dollars |
Installation Cost Material%/Labor% | 30% / 70% | 25% / 75% | 80% / 20% |
Surface roughness | 0.03 | 0.05 | 0.001 |
Special Tools Required (welder, threader, groove cutter) | Yes | Yes | No |
Air Quality | High(Should the application require it, these pipe systems can help meet the requirements of ISO 8573-1: 2010 air quality standards. | Low( Not according to !SO 8573-2010 air quality standards) | High(Should the application require it, these pipe systems can help meet the requirements of ISO 8573-1: 2010 air quality standards. |
Cost per meter | Almost 2 less than Aluminum | 3 Times less than Aluminum | 163.64 Dollars(Parker Transair) |
Life Span( Will vary according to environmental factors, Pipe design, and Pipe grade. | 30 years | 40 years | 20 years |
Initial Cost of installations | Material : 30% Labor:70% | Material : 25% Labor:75% | Material : 80% Labor:20% |
Maintenance | Difficult(Accumulation of rust under pipes and fittings which travels to machinery, may require preventive maintenance every week) | Difficult (Accumulation of rust under pipes and fittings which travels to machinery may require preventive maintenance every 3-4 days) | Easy (No accumulation of rust, may require preventive maintenance every 4 Weeks) |