“INTEGRA 5 – 22 T series” is produced as a new generation Tank Mounted Without Dryer, with iPM Motor, Dual Inverter, Direct Coupled without Coupling. It offers economical, compact and service-friendly solutions. It is a product series that has lower electricity consumption, is quieter and has less maintenance costs than classical models. Ideal for small businesses. It can be used in all areas of industry. Screw air compressor and air tank connections have been made. It is delivered as a “single unit” ready for use. It meets ‘compressed air quality requirements’ according to ISO 8573-1 standard.
• TÜV approved Air Tank
• IE5 ultra premium efficiency class, PTC protected.
• It is an oil-cooled engine type that operates in a closed circuit.
• It has a high protection class of IP65/F.
• It operates silently, there is no need for grease.
• It can work in more polluted environments than other classic models. There is no need for cooling air or fans.
• It does not require maintenance due to its bearing-free, frictionless internal structure and high protection.
• Motor windings are epoxy coated and do not cause short circuits.
• Provides optimum operation at low screw speeds. (Since the engine is oil-cooled, there is no heating.) It can operate with minimum capacity at lower speeds.
• Provides more stable operation; The motor-screw block is compact and integrated, directly coupled.
• Provides zero loss in transmission with its innovative, coupling-free connection. (No gear group, bell body, flexible coupling etc., no additional alignment required)
• Ability to drive both main motor and fan motor at the same time
• Simpler and less space-consuming electrical panel
• Variable Speed / Speed Adjustable Working Mode
• Extra energy-saving feature of working at constant outlet pressure
• Ability to protect the compressor from peak discharge currents
• Compressor components protection due to soft start
• Efficient operation by quickly responding to variable pressure air needs
• In terms of performance; The unit provides low terminal kW (specific power) per m3/min. (It has more advantageous energy consumption compared to other classical models.)
• It can provide up to 15% extra energy savings compared to classic inverter models.
• With its compact unit structure, it takes up less space than other classic models.
• Thanks to its oil-cooled and fanless main engine, it operates more quietly than other classic models.
• Independent & motor-integrated axial fan in every model provides effective cooling performance.
• Sarmak SELTRONİK Control System, unlike traditional solutions, with its Dual-inverter system specially designed for the screw compressor system; It drives both the main motor and the fan motor with separate control algorithms. With dual IGBT output, optimum efficiency is achieved from the main motor and fan motor.
• 4.3” inch graphical color touch screen; It has parameter and status indicators. (animations and symbols showing working-stopping states)
• There is no need for an extra power supply to power the compressor controller or sensors.
• Energy-saving sleep function
• Graphical representation of pressure and temperature values
• Maintenance periods settings
• Ability to program a start-stop work table
• Working schedule
• Solenoid valve opening / closing delay times can be set
• Ability to make software updates via computer connection
• TÜV-SÜD/Germany approved, vertically positioned, original design and manufacturing Separator Tank
• Atomic separator type Air/Oil Separator filter element that provides ease of service
• Air suction filter, Suction regulator/valve, safety valve, min. pressure check valve, factory filled oil, sound and vibration insulated canopy, chassis
ALL PERFORMANCE VALUES ARE ACCORDING TO CAGI PNEUROP / PN 2 CPTC 2 NORMS. FREE AIR DELIVERY WAS MEASURED AT NOMINAL WORKING PRESSURE (MAX-0.5 BAR).
WARRANTY TOLERANCES: THE FLOW FLOW AND SPECIFIC POWER REQUIREMENT BASED ON THE NOMINAL CONDITIONS ARE GUARANTEED ACCORDING TO THE TOLERANCES SPECIFIED IN ACCORDANCE WITH THE ISO 1217-ANNEX C STANDARD.
STANDARDS: FREE AIR DELIVERY – PRESSURE (CAGI PNEUROP PN2CPTC2 – ISO1217-ANNEX C), SOUND LEVEL (CAGI PNEUROP PN8NTC2), QUALITY (ISO9001:2015)
SARMAK MAKİNA A.Ş. INTEGRA T SERIES COMPRESSORS PRODUCED IN ITS FACILITIES ARE PRODUCED WITH GREAT METICULOUSITY AND SUPERIOR TECHNOLOGY. EACH UNIT IS PASSED THROUGH ‘FUNCTION AND PERFORMANCE TESTS’ IN THE MODERN TEST CENTER OF OUR PRODUCTION FACILITY, AND AFTER QUALITY CONTROL IS CARRIED OUT BY OUR ENGINEERS, IT IS DELIVERED TO USERS IN A CONDITION SUITABLE FOR “FIRST-OPERATION”.
