MAIN ENGINE AND DRIVE SYSTEM

• Current IE class efficient, IP55/F, PTC protected Electric Motor

• Star-Delta (Contactor) Operating Mode

• Automatic Belt Tensioning System

• Bushing pulleys provide ease of service

SCREW BLOCK AND CONNECTION

• Efficient screw block of European origin, selected specifically for the capacity of each compressor model

• 16 barg pressure resistant design

• Low torque requirement with optimum speed selected in safe area

• Long-lasting construction with the selection of quality and new generation bearings

• Oil seal system with Fail-Safe System (FSS)

• Integrated thermostat and oil filter

• Connection to the original output diameter of the screw block (without pressure loss)

• Connection to air/oil separator via minimum elbow pipe using original coupling

CONTROL PANEL

• Contents of the panel: star-delta contactor set, fan contactor set, motor protection switch & fuse, control transformer (24V), emergency stop switch, on/off button, control panel (CPU), LED digital monitor

ELECTRONIC CONTROL/CONTROL SYSTEM

• Microprocessor-controlled electronic control card offering operating status, stop status, total and load operating time, pressure regulation, mains pressure and screw temperature measurements, protection functions in case of alarm and many other parameter controls.

• Energy-saving automatic operating mode

• Message display feature as text

• Up to 24 language options

• 3.2” color graphic LED backlit display

• Co-aging option for up to 8 compressors

• Custom identification for up to 10 different users

• Access to parameters with password

• 4 programmable relays

• Integrated Main Motor & Fan motor current protection

• Display of the average value of phase voltages

• Programming 8 maintenance periods

• Real-time recording of 50 faults

• Compatible with all SCADA applications, parameter access, reading and writing capabilities

• RS485, Airbus, ModbusRTU communication protocols

• Compatibility with multiple compressor automation (energy algorithm etc.) systems (DCO, P4, SX, XC)

• Industry 4.0 / IoT ready configuration

• Remote control/command capability depending on the compressor model (optional)

• 2014/35/EU and 2014/30/EU: Fully compliant with European EMC and LVD directives.

• Durable ABS plastic housing

COOLING SYSTEM

• Air Radiator with large volume and suitable for the most difficult conditions (minimum load on the dryer)

• New generation Oil Radiator with large volume, resistant to thermal stresses and vibration (Optimum temperature difference)

• 4 silent axial fans with integrated motors built into the unit (number varies depending on model)

• Quality and long-lasting compressor oil

• Low amount of oil vapor in the compressed outlet air ≤ 3 ppm

• Optional ‘Heat Recovery Module’ integration

SEPARATOR SYSTEM

• TÜV-SÜD/Germany approved, vertically positioned, original design and manufacturing Separator Tank

• Immersion type Air/Oil Separator filter element that provides ease of service

OTHER COMPONENTS IN THE PRODUCT

• Double air suction filter, Suction regulator/valve, safety valve, min. pressure check valve, factory filled oil, sound and vibration insulated canopy, chassis