MAIN ENGINE AND DRIVE SYSTEM

• Current IE class efficient, IP55/F, PTC protected Electric Motor

• Extra PT100 protection on motor winding

• Automatic Belt Tensioning System

• Bushing pulleys provide ease of service

INVERTER (FREQUENCY CONVERTER) MODULE

• Variable Speed ​​/ Speed ​​Adjustable Working Mode

• Energy-saving feature of working at constant outlet pressure

• Ability to protect the compressor from peak discharge currents

• Compressor components protection due to soft start

• Efficient operation by quickly responding to variable pressure air needs

• Ability to control and monitor Motor PT100 temperature from the inverter screen

SCREW BLOCK AND CONNECTION

• Efficient screw block of European origin, selected specifically for the capacity of each air compressor model

• 16 barg pressure resistant design

• Long life, optimum cycle

• Long-lasting construction with the selection of quality and new generation bearings

CONTROL PANEL

• Contents of the panel: star-delta contactor set, fan contactor (Robot 30-66 DA), motor protection switch & fuse, control transformer (24V), emergency stop switch, on/off button, control panel (CPU), LCD digital monitor

ELECTRONIC CONTROL/CONTROL SYSTEM

• Microprocessor-controlled electronic control card offering operating status, stop status, total and load operating time, pressure regulation, mains pressure and screw temperature measurements, protection functions in case of alarm and many other parameter controls.

• Energy-saving automatic operating mode

• Message display feature as text

• Suitable for VSD (Inverter) operating mode

• 2.4” color graphic LED illuminated display depending on the compressor model

• Option to co-age other compressors

• Access to parameters with password

• Ability to update software or set advanced parameters via PC

• 4 programmable relays

• Integrated Main Motor & Fan motor current protection

• Display of the average value of phase voltages

• Programming 4 maintenance periods according to the compressor model

• Real-time recording of the last 16 faults by compressor model

• Compatible with all SCADA applications, parameter access, reading and writing capabilities

• RS485, Airbus, ModbusRTU communication protocols

• Compatibility with multiple compressor automation (energy algorithm etc.) systems (DCO, P4)

• Industry 4.0 / IoT ready configuration

• Remote control/command capability depending on the compressor model (optional)

• 2014/35/EU and 2014/30/EU: Fully compliant with European EMC and LVD directives

• Durable ABS plastic housing

COOLING SYSTEM

• Large Volume Combi Air/Oil Radiator, compatible with the harshest conditions (minimum load on the dryer)

• Effective axial fan integrated into the main engine, sucking into the unit (independent axial fan in some models)

• Quality and long-lasting compressor oil

• Optional ‘Heat Recovery Module’ integration

SEPARATOR SYSTEM

• TÜV-SÜD/Germany approved, horizontally positioned, original design and manufacturing separator tank (upright type in some models)

• Spin-on type Air/Oil Separator filter element that provides ease of service (immersion type in some models)

OTHER COMPONENTS IN THE PRODUCT

• Air suction filter, Suction regulator/valve, safety valve, min. pressure check valve, factory filled oil, sound and vibration insulated canopy, chassis

ALL PERFORMANCE VALUES ARE ACCORDING TO CAGI PNEUROP / PN 2 CPTC 2 NORMS. FREE AIR DELIVERY WAS MEASURED AT NOMINAL WORKING PRESSURE (7 BAR – 9.5 BAR -12.5 BAR – 14.5 BAR).

WARRANTY TOLERANCES: THE FLOW FLOW AND SPECIFIC POWER REQUIREMENT BASED ON THE NOMINAL CONDITIONS ARE GUARANTEED ACCORDING TO THE TOLERANCES SPECIFIED IN ACCORDANCE WITH THE ISO 1217-ANNEX C STANDARD.

STANDARDS: FREE AIR DELIVERY – PRESSURE (CAGI PNEUROP PN2CPTC2 – ISO1217-ANNEX C), SOUND LEVEL (CAGI PNEUROP PN8NTC2), QUALITY (ISO9001:2015)

SARMAK MAKİNA A.Ş. ROBOT 15 – 62 DA SERIES COMPRESSORS PRODUCED IN ITS FACILITIES ARE MANUFACTURED WITH GREAT METHODOLOGY AND SUPERIOR TECHNOLOGY. EACH UNIT IS PASSED THROUGH ‘FUNCTION AND PERFORMANCE TESTS’ IN THE MODERN TEST CENTER OF OUR PRODUCTION FACILITY, AND AFTER QUALITY CONTROL IS CARRIED OUT BY OUR ENGINEERS, IT IS DELIVERED TO USERS IN A CONDITION SUITABLE FOR “FIRST-OPERATION”.