High Capacity Filter

SARMAK Compressor- European

Air Energy Compressors-Chinese

Portable Compressor

Aluminum & Stainless Steel Piping

On-Site Nitrogen Generators

On-Site Oxygen Generators

Vacuum Pumps

Blowers

Downstream Equipment

Air Receiver

Air Water Flow

Spares

Lubricants

Air Leakage Detector

Services

Every manufacturing site’s compressed air discharge should be filtered via various particule and oil sensitivity filters in order to have purified quality compressed air at point of use; such as automation systems, processes, pneumatic tools etc. “CFS series” large capacity cartridge-type flanged filters include various models with particule, oil and oil vapor filtration capabilities. This series include integrated differential pressure gage and automatic condensate drain.

PRODUCT INFORMATION

Cartridge type oil and dust compressed air filters. Produced with high quality, multi-layered, and large surface area. It is recommended to be used before and after the air dryer according to the quality of the compressed air at the outlet. The inside and outside of the filter body are treated with electrophoretic coating against rust. It has a hinge/lever mechanism that allows a single operator to easily perform maintenance and change the cartridge.

Filter Sensitivity Levels

• 0 : 1 micron particle, 0.5 mg/m3 oil (Before the dryer)

• 1 : 0.01 micron particle, 0.01 mg/m3 oil (After the dryer)

• 2 : 0.003 mg/m3 oil vapor (After the dryer)

TECHNICIAL SPECIFICATIONS

Model	Nom. Capacity		Connection	Max. Pressure (bar)	Max. Temperature (°C)	Material	Width x Height (mm)	<ağırlık <br=””>Weight(kg)</ağırlık>
Model	(m3/min)	(cfm)	Connection	Max. Pressure (bar)	Max. Temperature (°C)	Material	Width x Height (mm)	<ağırlık <br=””>Weight(kg)</ağırlık>
CFS 500	50,0	1.765,7	DN150	16	60	Aluminum	522 x 1372	100
CFS 600	60,0	2.118,8	DN150	16	60	Aluminum	522 x 1372	105
CFS 800	80,0	2.825,1	DN150	16	60	Aluminum	590 x 1438	135
CFS 1000	100,0	3.531,4	DN150	16	60	Aluminum	590 x 1438	140
CFS 1200	120,0	4.237,7	DN150	16	60	Aluminum	810 x 1630	160
CFS 1400	140,0	4.944,0	DN150	16	60	Aluminum	810 x 1630	165

DETERMINES THE LEVEL OF FILTRATION.(-0, -1, OR -2)

CAPACITY IS GIVEN AT 7 BARG OPERATING PRESSURE. PLEASE CONSULT REGARDING CORRECTION FACTORS FOR DIFFERENT OPERATING PRESSURES.

STANDARDS: MANUFACTURED ACCORDING TO 2006/42/EC, EN ISO 12100:2010 DIRECTIVES. QUALITY ASSURANCE CERTIFICATION FOR ISO9001:2015 AND ISO14001:2015 AVAILABLE.

Piping Material Features Comparison
Piping Features	Stainless Steel(Type 304L)	Mild Steel	Blue anodized Aluminum Alloy
Weight (Dia 6inch, Length 6m)	127.2	169.6	29.142
Corrosion Resistant	Yes	No	Yes(100%)
Pressure drop (Dia 2 inch Length= 20m,Airflow=3 cubic metres/Minute, Pressure=10 bar)	0.25	0.4 Bar	0.1
Energy Efficiency	High	Low-moderate	High( Potential Cost savings of 34%)
Mechanical Strength	Very Strong	Very Strong	Strong
High-Temperature Rating	Yes	Yes	Yes
Installation Ease	Less Difficult	Difficult	Easy(High Flexibility and Modularity)
Installation Time	Approx 6 feet length per hour	Approx 6 feet length per hour	Approx 45 feet Length per hour
Work Hours/Manpower Required for a 2″ pipe and a 3000 feet piping	Approx 600 man-hours/8 men for 2 weeks	Approx 600 man-hours/8 men for 2 weeks	Approx 100 man-hours /8 men for less than 2 days
Annual Cost(Installation, Commissioning, and operation)	Approx 3000 dollars	Approx 7820 dollars	Approx 1300 dollars
Installation Cost Material%/Labor%	30% / 70%	25% / 75%	80% / 20%
Surface roughness	0.03	0.05	0.001
Special Tools Required (welder, threader, groove cutter)	Yes	Yes	No
Air Quality	High(Should the application require it, these pipe systems can help meet the requirements of ISO 8573-1: 2010 air quality standards.	Low( Not according to !SO 8573-2010 air quality standards)	High(Should the application require it, these pipe systems can help meet the requirements of ISO 8573-1: 2010 air quality standards.
Cost per meter	Almost 2 less than Aluminum	3 Times less than Aluminum	163.64 Dollars(Parker Transair)
Life Span( Will vary according to environmental factors, Pipe design, and Pipe grade.	30 years	40 years	20 years
Initial Cost of installations	Material : 30% Labor:70%	Material : 25% Labor:75%	Material : 80% Labor:20%
Maintenance	Difficult(Accumulation of rust under pipes and fittings which travels to machinery, may require preventive maintenance every week)	Difficult (Accumulation of rust under pipes and fittings which travels to machinery may require preventive maintenance every 3-4 days)	Easy (No accumulation of rust, may require preventive maintenance every 4 Weeks)