Water Separator

"Image of a Sarmak Water Separator, designed to efficiently remove moisture from compressed air systems, enhancing air quality and protecting equipment from water damage."

It is recommended to be used at the compressor outlet or before the dryer. It is used to discharge condensate/water droplets and particles formed as a result of pressure and temperature changes in the compressed air installation.
This ensures clean and dry compressed air, protecting downstream equipment from damage.
Regular use improves system efficiency and extends the life of pneumatic tools and machinery.

• Automatic condensate drain is integrated.

• By creating uninterrupted centrifugal force, waste is discharged with a very low pressure difference, thus providing maximum energy saving.

• Thanks to the Water Separator, problems such as corrosion, air leaks and valve jamming that may occur in pneumatic systems are prevented.

• High efficiency water separators cannot filter all the oil in compressed air, CFS or GFS series pre-filter, final-filter and carbon-filter should be used additionally for quality compressed air.

Model Nom. Capacity (m³/min) Capacity (cfm) Connection Max. Working Pressure (barg) Body Material Dimensions (W × H mm) Weight (kg)
WSS 70.724.7½”16Aluminum96 × 2781.3
WSS 121.242.3½”16Aluminum96 × 3771.3
WSS 232.381.2¾”16Aluminum124 × 3542.5
WSS 373.7130.61″16Aluminum124 × 4152.9
WSS 555.5194.21″16Aluminum124 × 5013.3
WSS 656.5229.21 ½”16Aluminum124 × 5013.7
WSS 11011.0388.42″16Aluminum160 × 6747.9
WSS 22022.0776.92 ½”16Aluminum272 × 78623
WSS 26026.0918.13”16Aluminum272 × 78623
WSS 35035.01,236.03”16Aluminum272 × 78625
WSS 45045.01,589.13”16Aluminum272 × 98635
WSS 50050.01,765.7DN15016Aluminum730 × 128080
WSS 60060.02,118.9DN15016Aluminum750 × 130090