Every manufacturing site’s compressed air discharge should be filtered via various particule and oil sensitivity filters in order to have purified quality compressed air at point of use; such as automation systems, processes, pneumatic tools etc. “CFS series” small / medium capacity filters cartridge-type filters include various models with particule, oil and oil vapor filtration capabilities. This series include integrated differential pressure gage and automatic condensate drain.
Cartridge type oil and dust compressed air filters.
Produced with high quality through multi-layered and wide surface area.
It is recommended to use before and after the air dryer according to the quality of compressed air at the outlet.
Manufactured in compliance with 2006/42/EC Machinery Directive, EN:ISO 12100:2010, and Air Purity Directive (ISO8573:2010).
Filter sensitivity levels
• 0: 1 MICRON PARTICLE, 0.5 MG/M3 OIL (BEFORE THE DRYER)
• 1: 0.01 MICRON PARTICLE, 0.01 MG/M3 OIL (AFTER THE DRYER)
• 2: 0.003 MG/M3 OIL VAPOR (AFTER THE DRYER)
Model | Nom. Capacity (m³/min) | Nom. Capacity (cfm) | Connection | Max. Pressure (bar) | Max. Temp (°C) | Material | Width x Height (mm) | Weight (kg) |
---|---|---|---|---|---|---|---|---|
CFS 7 | 0.7 | 24.7 | 1/2″ | 16 | 60 | Aluminum | 95 x 194 | 1.1 |
CFS 12 | 1.2 | 42.3 | 1/2″ | 16 | 60 | Aluminum | 95 x 274 | 1.5 |
CFS 23 | 2.3 | 81.2 | 3/4″ | 16 | 60 | Aluminum | 124 x 253 | 2.3 |
CFS 37 | 3.7 | 130.6 | 1″ | 16 | 60 | Aluminum | 124 x 312 | 2.7 |
CFS 55 | 5.5 | 94.2 | 1″ | 16 | 60 | Aluminum | 124 x 397 | 3.1 |
CFS 65 | 6.5 | 229.5 | 1 1/2″ | 16 | 60 | Aluminum | 124 x 397 | 3.4 |
CFS 110 | 11.0 | 388.4 | 2″ | 16 | 60 | Aluminum | 160 x 570 | 7.8 |
CFS 130 | 13.0 | 459.0 | 2″ | 16 | 60 | Aluminum | 160 x 570 | 7.9 |
CFS 220 | 22.0 | 776.9 | 2 1/2″ | 16 | 60 | Aluminum | 272 x 711 | 23 |
CFS 260 | 26.0 | 918.1 | 3″ | 16 | 60 | Aluminum | 272 x 711 | 23 |
CFS 350 | 35.0 | 1236.0 | 3″ | 16 | 60 | Aluminum | 272 x 711 | 25 |
CFS 450 | 45.0 | 1589.1 | 3″ | 16 | 60 | Aluminum | 272 x 911 | 35 |
Piping Material Features Comparison |
|||
Piping Features | Stainless Steel(Type 304L) | Mild Steel | Blue anodized Aluminum Alloy |
Weight (Dia 6inch, Length 6m) | 127.2 | 169.6 | 29.142 |
Anti-Corrosive | Yes | No | Yes(100%) |
Pressure drop (Dia 2 inch Length= 20m, Airflow=3 cubic metres/Minute, Pressure=10 bar) | 0.25 | 0.4 Bar | 0.1 |
Efficient Energy Use | High | Low-moderate | High( Potential Cost savings of 34%) |
Structural Durability | Very Strong | Very Strong | Strong |
High Thermal Endurance | Yes | Yes | Yes |
Installation Ease | Less Difficult | Difficult | Easy(High Flexibility and Modularity) |
Simple Installation | Approx 6 feet length per hour | Approx 6 feet length per hour | Approx 45 feet Length per hour |
Manpower and Work Hours Needed for 2″ Pipe Over 3000 Feet | Approx 600 man-hours/8 men for 2 weeks | Approx 600 man-hours/8 men for 2 weeks | About 100 man-hours with 8 workers, completed in under 2 days |
Annual Charges for Installation, Commissioning & Operation | Approx 3000 dollars | Approx 7820 dollars | Approx 1300 dollars |
Installation Cost Breakdown: Material % / Labor % | 30% / 70% | 25% / 75% | 80% / 20% |
Texture of Surface | 0.03 | 0.05 | 0.001 |
Required Specialized Tools: Welder, Threader, Groove Cutter | Yes | Yes | No |
Quality of Air | High — When needed, these pipe systems comply with ISO 8573-1:2010 air quality standards | Low( Not according to !SO 8573-2010 air quality standards) | High — These pipe systems support compliance with ISO 8573-1:2010 air quality standards when required. |
Cost Rate per Meter | Almost 2 less than Aluminum | 3 Times less than Aluminum | 163.64 Dollars |
Service Life Depends on Environment, Pipe Design, and Grade | 30 years | 40 years | 20 years |
Upfront Installation Cost | Material : 30% Labor:70% | Material : 25% Labor:75% | Material : 80% Labor:20% |
Care and Maintenance | Difficult — Rust buildup under pipes and fittings can reach machinery, requiring weekly preventive maintenance. | Difficult (Accumulation of rust under pipes and fittings which travels to machinery may require preventive maintenance every 3-4 days) | Easy — No rust buildup, with preventive maintenance needed every 4 weeks. |