ACT VS INVERTER DRYERS - CoolAir Compressors

ACT VS INVERTER DRYERS (Premium)

SARMAK Compressor- European

Air Energy Compressors-Chinese

Portable Compressor

Aluminum & Stainless Steel Piping

On-Site Nitrogen Generators

On-Site Oxygen Generators

Vacuum Pumps

Blowers

Downstream Equipment

Air Receiver

Air Water Flow

Spares

Lubricants

Air Leakage Detector

Services

The high efficiency cooling module has a direct effect on pressure drops and energy saving. Low pressure drops are observed in ACT VS series even with load changes. In addition, the pressure dew point is fixed according to changing load conditions. ACT VS Series dryers contain environmentally friendly “R407C” refrigerant and are manufactured from environmentally friendly materials. (Compliant with 2002/95/CE “RoHS” and 2002/96/CE “WEEE” European Directives)

PRODUCT INFORMATION

The ACT-VS series is one of the most advanced refrigerant compressed air dryer products. The touch-screen controller in the product, which includes the latest technology and functions, allows all operating parameters of the machine to be controlled. The integrated inverter set can adjust the refrigerant compression and speed. Therefore, the dryer can completely control the energy requirement to fix the +3°C dew point. It includes an integrated electronic level-controlled condensate discharge device, which contributes to extra energy saving, so that there is no loss of compressed air when the condensate is discharged.

• Made in Italy

• Touch color controller

• ALU-DRY patented aluminum heat exchanger (Vertical and Cross-Air Flow)

• Water pressure valve (on water-cooled models)

• RS485 modbus

• High efficiency cooling compressor with thermal or thermo-ammeter protection

• High temperature protection and phase sequence relay protection in the cooling compressor (in 3 phase models)

• Automatic condensate pressure control

• Effective protection for refrigerant with high and low pressure safety valves

• Electronic Expansion and bypass valves

• Integrated electronic level controlled condensate discharge device

• Cooling compressor crankcase heater (3 phase models)

MAXIMUM WORKING CONDITIONS :

Ambient Temperature: + 45°C

Inlet air pressure: 14 barg

Inlet air temperature: + 70°C

TECHNICIAL SPECIFICATIONS

Model	Capacity (m3/min)	Connection Ø (input-output)	Power Supply (Phase/V/Fr)	Width (mm)	Depth (mm)	Height (mm)	Weight (kg)
ACT 210 VS	21.0	DN80PN16	3/400/50-60	790	one thousand	1465	248
ACT 300 VS	30.0	DN80PN16	3/400/50-60	790	one thousand	1465	282
ACT 400 VS	40.0	DN100PN16	3/400/50-60	1135	1205	1745	470
ACT 500 VS	50.0	DN100PN16	3/400/50-60	1135	1205	1745	545
ACT 600 VS	60.0	DN100PN16	3/400/50-60	1135	1205	1745	549
ACT 720 VS	73.6	DN100PN16	3/400/50-60	1135	1205	1745	621
ACT 900 VS	90.0	DN150PN16	3/400/50	1300	1750	1810	843
ACT 1100 VS	110.4	DN150PN16	3/400/50	1300	1750	1810	954
ACT 1200 VS	120.0	DN200PN16	3/400/50	1400	2200	1870	1071
ACT 1500 VS	147.2	DN200PN16	3/400/50	1400	2200	1870	1218
ACT 1800 VS	180.0	DN200PN16	3/400/50	1455	2165	2440	1450
ACT 2200 VS	220.8	DN200PN16	3/400/50	1455	2165	2440	2160
ACT 2400 VS	240.0	DN250PN16	3/400/50	1450	2730	2455	2230
ACT 3000 VS	294.4	DN250PN16	3/400/50	1450	2730	2455	3000

Nominal conditions : Ambient Temperature + 25 °C; Inlet Air Pressure 7 barg; Inlet Air Temperature +35 °C, Dew Point +3 °C

Maximum conditions : Ambient Temperature + 45 °C; Inlet Air Pressure 14 barg; Inlet Air Temperature +70 °C.

“ R407C ” is used as cooling gas in ACT-VS series . (Exception: R134A in ACT 210VS)

FCT-VS series uses “ R513A ” as cooling gas . (the most environmentally friendly gas)

Piping Material Features Comparison
Piping Features	Stainless Steel(Type 304L)	Mild Steel	Blue anodized Aluminum Alloy
Weight (Dia 6inch, Length 6m)	127.2	169.6	29.142
Corrosion Resistant	Yes	No	Yes(100%)
Pressure drop (Dia 2 inch Length= 20m,Airflow=3 cubic metres/Minute, Pressure=10 bar)	0.25	0.4 Bar	0.1
Energy Efficiency	High	Low-moderate	High( Potential Cost savings of 34%)
Mechanical Strength	Very Strong	Very Strong	Strong
High-Temperature Rating	Yes	Yes	Yes
Installation Ease	Less Difficult	Difficult	Easy(High Flexibility and Modularity)
Installation Time	Approx 6 feet length per hour	Approx 6 feet length per hour	Approx 45 feet Length per hour
Work Hours/Manpower Required for a 2″ pipe and a 3000 feet piping	Approx 600 man-hours/8 men for 2 weeks	Approx 600 man-hours/8 men for 2 weeks	Approx 100 man-hours /8 men for less than 2 days
Annual Cost(Installation, Commissioning, and operation)	Approx 3000 dollars	Approx 7820 dollars	Approx 1300 dollars
Installation Cost Material%/Labor%	30% / 70%	25% / 75%	80% / 20%
Surface roughness	0.03	0.05	0.001
Special Tools Required (welder, threader, groove cutter)	Yes	Yes	No
Air Quality	High(Should the application require it, these pipe systems can help meet the requirements of ISO 8573-1: 2010 air quality standards.	Low( Not according to !SO 8573-2010 air quality standards)	High(Should the application require it, these pipe systems can help meet the requirements of ISO 8573-1: 2010 air quality standards.
Cost per meter	Almost 2 less than Aluminum	3 Times less than Aluminum	163.64 Dollars(Parker Transair)
Life Span( Will vary according to environmental factors, Pipe design, and Pipe grade.	30 years	40 years	20 years
Initial Cost of installations	Material : 30% Labor:70%	Material : 25% Labor:75%	Material : 80% Labor:20%
Maintenance	Difficult(Accumulation of rust under pipes and fittings which travels to machinery, may require preventive maintenance every week)	Difficult (Accumulation of rust under pipes and fittings which travels to machinery may require preventive maintenance every 3-4 days)	Easy (No accumulation of rust, may require preventive maintenance every 4 Weeks)