ROBOT 165-232 DAC _

SARMAK Compressor- European

Air Energy Compressors-Chinese

Portable Compressor

Aluminum & Stainless Steel Piping

On-Site Nitrogen Generators

On-Site Oxygen Generators

Vacuum Pumps

Blowers

Downstream Equipment

Air Receiver

Air Water Flow

Spares

Lubricants

Air Leakage Detector

Services

“ROBOT 165 – 232 DAC Series” offers very efficient and service-friendly solutions with long life components & system. With the integrated inverter module, it is ideal for medium size businesses who need energy saving. It can be used in every industry sector. Shipped as one unit ready for start-up / commissioning.

PRODUCT INFORMATION

MAIN MOTOR AND DRIVE SYSTEM

* Valid IE class efficiency, IP55/F, PTC protected Electric Motor

* Extra PT100 protection on motor winding; as standard

* 1:1 Direct Drive System

* Patented technology, natural rubber elastic coupling element. Long product life, easy to disassemble quickly.

INVERTER (FREQUENCY CONVERTER) MODULE

* Variable Speed / Speed regulated Operating Mode

* Energy-saving operating mode with a stable pressure point at discharge

* Protection of compressor unit against peak starting current

* Protection of compressor components with softstarting

* Efficient operation: fast response to fluctuations in compressed air demands

* Control and monitoring of Motor PT100 temperature through inverter panel

AIREND AND CONNECTION

* Specially selected for every model capacity; Made in Europe

* Optimum minimum-maximum airend speed range according to the safe-zone of the motor

* Optimum capacity & minimum shaft power

* Max.Pressure 16 barg

* Long-lasting and quality-made design with new generation bearing selection.

* No pressure-loss at discharge of airend with original diameter piping

* Direct connection with original victualic © couplings to air/oil separator tank with minimal elbows

ELECTRICAL CABINET

* Includes: inverter set, fan contactor, motor protection switch & fuse, control transformer (24V)

* Emergency stop switch, on/off switch, control panel (CPU), LCD digital monitor.

ELECTRONIC CONTROL/COMMAND SYSTEM

* Microprocessor-controlled electronic control/command module with Start/Stop mode, total or on-load operating time,

pressure regulation, system pressure and oil temperature, protection functions during alarms.

* Automatic operating mode which saves energy

* Message monitoring as text in different languages

* Up to 24 languages

* 3.2″ color LED display monitor

* Sequence operation model up to 8 compressor units

* 10 different user setting profiles

* Password protection to access parameters

* 4 programmable relays

* Integrated main motor and fan motor overcurrent protection

* Display of average value of phase voltages

* 8 qty. maintenance programming

* 50 qty. real-time logs

* Read-write-access parameters, compatible with SCADA systems

* RS485, Airbus, ModbusRTU communication protocols

* Compatible with multi-compressor automation systems for energy algorithms (DCO, P4, SX, XC)

* Ready for Industry 4.0 / IOT configurations

* Remote control/command option

* Compatible with 2014/35/EU and 2014/30/EU: European EMC and LVD directives.

* Robust and resistant ABS plastic cover

COOLING SYSTEM

* High Volume Air Cooler resistant to harsh conditions (minimum load to Dryer)

* New Generation High volume Robust Oil Cooler resistant to thermal expansions and vibrations (optimum Delta T)

* 1 or 2 qty. Independent silent motor-integrated Inlet Axial Fans for effective cooling; depending on the model

* Quality and long-lasting compressor oil

* Less than 3 ppm oil residual in the discharge compressed air

* Optional integrated heat recovery system

SEPARATOR SYSTEM

* Original design and production by Sarmak: Vertical Air/Oil Tank certified by TÜV-SÜD/Germany

* Service-friendly, Vertical type Air/Oil separator filter element

OTHER COMPONENTS

* Inlet air filter, intake valve, safety valve, minimum pressure checkvalve, factory filled oil,

* Sound and vibration insulated canopy, chassis.

TECHNICIAL SPECIFICATIONS

Model	Maximum Operating Pressure		Free Air Delivery				Nominal Motor Power		Sound Level from 1mt (dBA)	Compressed Air Connection	Dimensions			Total Weight (kg)
	(bar g)	(psi g)	Minimum		Maximum		(kW)	(HP)			Length (mm)	Width (mm)	Height (mm)
	(bar g)	(psi g)	(m3/min)	(cfm)	(m3/min)	(cfm)	(kW)	(HP)			Length (mm)	Width (mm)	Height (mm)
ROBOT 165 DAC	7.5	108.7	6.30	222.4	16.25	573.8	90	125	76	2″	2.655	1.610	1.860	2.500
ROBOT 166 DAC	10	145.0	6.83	241.2	13.95	492.6	90	125	76	2″	2.655	1.610	1.860	2.500
ROBOT 167 DAC	13	188.5	6.67	235.5	11.90	420.2	90	125	76	2″	2.655	1.610	1.860	2.500
ROBOT 180 DAC	7.5	108.7	6.50	229.5	17.45	616.2	90	125	77	3″	2.655	1.610	1.860	2.920
ROBOT 181 DAC	10	145.0	7.05	248.9	15.47	546.3	90	125	77	3″	2.655	1.610	1.860	2.920
ROBOT 182 DAC	13	188.5	6.88	242.9	13.45	474.9	90	125	77	3″	2.655	1.610	1.860	2.920
ROBOT 210 DAC	7.5	108.7	7.39	260.9	20.77	733.4	110	150	77	3″	2.655	1.610	1.860	3.060
ROBOT 211 DAC	10	145.0	7.12	251.4	18.63	657.9	110	150	77	3″	2.655	1.610	1.860	3.060
ROBOT 212 DAC	13	188.5	7.03	248.2	16.21	572.4	110	150	77	3″	2.655	1.610	1.860	3.060
ROBOT 230 DAC	7.5	108.7	7.05	248.9	22.87	807.6	132	180	78	3″	2.905	1.760	1.860	3.260
ROBOT 231 DAC	10	145.0	6.70	236.6	20.10	709.8	132	180	78	3″	2.905	1.760	1.860	3.260
ROBOT 232 DAC	13	188.5	6.90	243.6	17.45	616.2	132	180	78	3″	2.905	1.760	1.860	3.260

* ALL PERFORMANCE VALUES ARE ACCORDING TO CAGI PNEUROP / PN 2 CPTC 2 NORMS. FREE AIR DELIVERY VALUES ARE GIVEN FOR NOMINAL OPERATING PRESSURES (7 BAR – 9,5 BAR – 12,5 BAR).

STANDARDS : FREE AIR DELIVERY-PRESSURE (CAGI PNEUROP PN2CPTC2-ISO 1217), SOUND LEVEL (CAGI PNEUROP PN8NTC2), QUALITY ASSURANCE (ISO 9001:2015).

GUARANTEED TOLERANCES : UNDER NOMINAL CONDITIONS, THE INDICATED FREE AIR DELIVERY (m3/min) AND SPECIFIC POWER (kW X min / m3) ARE COMPLIANT WITH ISO 1217-ANNEX C STANDARDS.

MANUFACTURED IN SARMAK MAKINA A.S. FACILITIES, NEW GENERATION ROBOT 165-232 DAC _ SERIES COMPRESSORS ARE PRODUCED WITH THE UTMOST IMPORTANCE AND STATE-OF-THE-ART TECHNOLOGY. EACH AND EVERY UNIT IS TESTED IN DETAIL FOR

FUNCTIONALITY AND PERFORMANCE IN OUR MODERN TEST CENTER DESIGNED ACCORDING TO ISO STANDARDS. AFTERWARDS, EACH UNIT IS CHECKED BY OUR EXPERIENCED ENGINEERS FOR SARMAK QUALITY ASSURANCES. FINALLY, THE UNIT IS

PACKAGED AND SHIPPED FOR START-UP AT CUSTOMER’S SITE.

Piping Material Features Comparison
Piping Features	Stainless Steel(Type 304L)	Mild Steel	Blue anodized Aluminum Alloy
Weight (Dia 6inch, Length 6m)	127.2	169.6	29.142
Corrosion Resistant	Yes	No	Yes(100%)
Pressure drop (Dia 2 inch Length= 20m,Airflow=3 cubic metres/Minute, Pressure=10 bar)	0.25	0.4 Bar	0.1
Energy Efficiency	High	Low-moderate	High( Potential Cost savings of 34%)
Mechanical Strength	Very Strong	Very Strong	Strong
High-Temperature Rating	Yes	Yes	Yes
Installation Ease	Less Difficult	Difficult	Easy(High Flexibility and Modularity)
Installation Time	Approx 6 feet length per hour	Approx 6 feet length per hour	Approx 45 feet Length per hour
Work Hours/Manpower Required for a 2″ pipe and a 3000 feet piping	Approx 600 man-hours/8 men for 2 weeks	Approx 600 man-hours/8 men for 2 weeks	Approx 100 man-hours /8 men for less than 2 days
Annual Cost(Installation, Commissioning, and operation)	Approx 3000 dollars	Approx 7820 dollars	Approx 1300 dollars
Installation Cost Material%/Labor%	30% / 70%	25% / 75%	80% / 20%
Surface roughness	0.03	0.05	0.001
Special Tools Required (welder, threader, groove cutter)	Yes	Yes	No
Air Quality	High(Should the application require it, these pipe systems can help meet the requirements of ISO 8573-1: 2010 air quality standards.	Low( Not according to !SO 8573-2010 air quality standards)	High(Should the application require it, these pipe systems can help meet the requirements of ISO 8573-1: 2010 air quality standards.
Cost per meter	Almost 2 less than Aluminum	3 Times less than Aluminum	163.64 Dollars(Parker Transair)
Life Span( Will vary according to environmental factors, Pipe design, and Pipe grade.	30 years	40 years	20 years
Initial Cost of installations	Material : 30% Labor:70%	Material : 25% Labor:75%	Material : 80% Labor:20%
Maintenance	Difficult(Accumulation of rust under pipes and fittings which travels to machinery, may require preventive maintenance every week)	Difficult (Accumulation of rust under pipes and fittings which travels to machinery may require preventive maintenance every 3-4 days)	Easy (No accumulation of rust, may require preventive maintenance every 4 Weeks)