MAIN ENGINE AND DRIVE SYSTEM

• Current IE class efficient, IP55/F, PTC protected Electric Motor

• Extra PT100 protection on motor winding

• 1:1 Direct Coupling System

• Coupling with natural rubber elastic parts, with patented technology, providing ease of service during disassembly, lasting up to 6 times longer.

INVERTER (FREQUENCY CONVERTER) MODULE

• Variable Speed ​​/ Speed ​​Adjustable Working Mode

• Energy-saving feature of working at constant outlet pressure

• Ability to protect the compressor from peak discharge currents

• Compressor components protection due to soft start

• Efficient operation by quickly responding to variable pressure air needs

• Ability to control and monitor Motor PT100 temperature from the inverter screen

• Dual-Inverter system in EXPERT-E versions (separate control algorithms for main motor and fan)

• Automatic pressure adjustment capability between 7-13 bars in EXPERT-E versions

SCREW BLOCK AND CONNECTION

• Efficient screw block of European origin, selected specifically for the capacity of each compressor model

• Optimum minimum-maximum speed range selected according to the safe speed range of the engine

• Optimum capacity & minimum shaft power

• 16 barg pressure resistant design

• Long-lasting construction with the selection of quality and new generation bearings

• Connection to the original output diameter of the screw block (without pressure loss)

• Connection to air/oil separator via minimum elbow pipe using original coupling

CONTROL PANEL

• Contents of the panel: inverter set, fan contactor set, motor protection switch & fuse, control transformer (24V), emergency stop switch, on/off button, control board (CPU), LED digital monitor

ELECTRONIC CONTROL/CONTROL SYSTEM

• Microprocessor-controlled electronic control card offering operating status, stop status, total and load operating time, pressure regulation, mains pressure and screw temperature measurements, protection functions in case of alarm and many other parameter controls.

• Energy-saving automatic operating mode

• Message display feature as text

• Up to 24 language options

• 3.2” color graphic LED backlit display

• Co-aging option for up to 8 compressors

• Custom identification for up to 10 different users

• Access to parameters with password

• 4 programmable relays

• Integrated Main Motor & Fan motor current protection

• Display of the average value of phase voltages

• Programming 8 maintenance periods

• Real-time recording of 50 faults

• Compatible with all SCADA applications, parameter access, reading and writing capabilities

• RS485, Airbus, ModbusRTU communication protocols

• Compatibility with multiple compressor automation (energy algorithm etc.) systems (DCO, P4, SX, XC)

• Industry 4.0 / IoT ready configuration

• Remote control/command capability depending on the compressor model (optional)

• 2014/35/EU and 2014/30/EU: Fully compliant with European EMC and LVD directives.

• Durable ABS plastic housing

• Touch screen in EXPERT-E versions

COOLING SYSTEM

• Air Radiator with large volume and suitable for the most difficult conditions (minimum load on the dryer)

• Large Volume and Durable Oil Radiator (Optimum temperature difference)

• 2 integrated-motor, silent axial fans built into the unit

• Quality and long-lasting compressor oil

• Low amount of oil vapor in the compressed outlet air ≤ 3 ppm

• Optional ‘Heat Recovery Module’ integration

SEPARATOR SYSTEM

• TÜV-SÜD/Germany approved, vertically positioned, original design and manufacturing Separator Tank

• Immersion type Air/Oil Separator filter element that provides ease of service

OTHER COMPONENTS IN THE PRODUCT

• Air suction filter, Suction regulator/valve, safety valve, min. pressure check valve, factory filled oil, sound and vibration insulated canopy, chassis

ALL PERFORMANCE VALUES ARE ACCORDING TO CAGI PNEUROP / PN 2 CPTC 2 NORMS. FREE AIR DELIVERY WAS MEASURED AT NOMINAL WORKING PRESSURE (7 BAR – 9.5 BAR – 12.5 BAR).

WARRANTY TOLERANCES : THE FLOW FLOW AND SPECIFIC POWER REQUIREMENT BASED ON NOMINAL CONDITIONS ARE GUARANTEED ACCORDING TO THE TOLERANCES SPECIFIED IN ACCORDANCE WITH ISO 1217-ANNEX C STANDARD.

STANDARDS : FREE AIR DELIVERY – PRESSURE (CAGI PNEUROP PN2CPTC2 – ISO1217-ANNEX C), SOUND LEVEL (CAGI PNEUROP PN8NTC2), QUALITY (ISO9001:2015)

SARMAK MAKİNA A.Ş. EXPERT SERIES COMPRESSORS PRODUCED IN ITS FACILITIES ARE MANUFACTURED WITH GREAT METICULOUSITY AND SUPERIOR TECHNOLOGY. EACH UNIT IS PASSED THROUGH ‘FUNCTION AND PERFORMANCE TESTS’ IN THE MODERN TEST CENTER OF OUR PRODUCTION FACILITY, AND AFTER QUALITY CONTROL IS CARRIED OUT BY OUR ENGINEERS, IT IS DELIVERED TO USERS IN A CONDITION SUITABLE FOR “FIRST-OPERATION”.