Ultraprobe 15,000

All-in-One monitoring system. Every condition, analyzed.

$21,995

The Ultraprobe 15,000 uses ultrasound to analyze everything from bearings and electrical systems to steam traps and leaks. With an intuitive, built-in touch screen, this single hand-held tool can easily test and report on every aspect of a plant’s equipment.

Why choose the Ultraprobe 15,000?

Collect and Analyze Data Faster:

Data syncs via WiFi communication directly to DMS Software
Get instant temperature readings
Pinpoint locations with laser pointer

Use Intuitive Touch Screen Technology:

Analyze conditions with the on-board spectrum analyzer
See historical data and identify trends

Access multiple data screens: dB / temperature / spectrum analysis

Plan and review routes, images, and sounds on-board

Determine and store the RPM of a rotating asset with the fully integrated strobe light

Photograph test points with on-board camera

Review alarm groups and generate reports

Store data, sound recordings, and images

Cloud ready

Bluetooth Headset Ready

Piping Material Features Comparison
Piping Features	Stainless Steel(Type 304L)	Mild Steel	Blue anodized Aluminum Alloy
Weight (Dia 6inch, Length 6m)	127.2	169.6	29.142
Corrosion Resistant	Yes	No	Yes(100%)
Pressure drop (Dia 2 inch Length= 20m,Airflow=3 cubic metres/Minute, Pressure=10 bar)	0.25	0.4 Bar	0.1
Energy Efficiency	High	Low-moderate	High( Potential Cost savings of 34%)
Mechanical Strength	Very Strong	Very Strong	Strong
High-Temperature Rating	Yes	Yes	Yes
Installation Ease	Less Difficult	Difficult	Easy(High Flexibility and Modularity)
Installation Time	Approx 6 feet length per hour	Approx 6 feet length per hour	Approx 45 feet Length per hour
Work Hours/Manpower Required for a 2″ pipe and a 3000 feet piping	Approx 600 man-hours/8 men for 2 weeks	Approx 600 man-hours/8 men for 2 weeks	Approx 100 man-hours /8 men for less than 2 days
Annual Cost(Installation, Commissioning, and operation)	Approx 3000 dollars	Approx 7820 dollars	Approx 1300 dollars
Installation Cost Material%/Labor%	30% / 70%	25% / 75%	80% / 20%
Surface roughness	0.03	0.05	0.001
Special Tools Required (welder, threader, groove cutter)	Yes	Yes	No
Air Quality	High(Should the application require it, these pipe systems can help meet the requirements of ISO 8573-1: 2010 air quality standards.	Low( Not according to !SO 8573-2010 air quality standards)	High(Should the application require it, these pipe systems can help meet the requirements of ISO 8573-1: 2010 air quality standards.
Cost per meter	Almost 2 less than Aluminum	3 Times less than Aluminum	163.64 Dollars(Parker Transair)
Life Span( Will vary according to environmental factors, Pipe design, and Pipe grade.	30 years	40 years	20 years
Initial Cost of installations	Material : 30% Labor:70%	Material : 25% Labor:75%	Material : 80% Labor:20%
Maintenance	Difficult(Accumulation of rust under pipes and fittings which travels to machinery, may require preventive maintenance every week)	Difficult (Accumulation of rust under pipes and fittings which travels to machinery may require preventive maintenance every 3-4 days)	Easy (No accumulation of rust, may require preventive maintenance every 4 Weeks)