Application

Rotary, Screw, and Vane Air / Gas Compressors.

Customer Benefits

• Saves on maintenance and downtime, excellent oxidation stability, and low carbon forming tendency of the highly refined base oil and special inhibitor system reduces the build-up of harmful deposits on critical areas, maintaining compressor performance under severest operating conditions. Provides excellent lubrication.
• Protects sensitive compressor parts against wear and tear
• Extends the operating life of equipment. Protects against carbon buildup
• Providing good oxidation resistance through the use of advanced additives.
• Good antifoaming properties
• Allows good Oil/air separation without excessive foaming to give trouble-free operation. Gives maximum protection against rust and corrosion
• Reducing maintenance costs and downtime.
• Increases overall compressor efficiency for both (Screw and Vane) type of compressors. Increases oil drain intervals up to 3000 hours in normal operations.
• High oxidation stability also resists oil breakdown at high discharge temperatures in compressor rank case applications, permitting long oil drain intervals.

2. Composition / information on ingredients

• Highly refined mineral oil (IP 346 DMSO extract < 3%) Proprietary performance additives.
• This product does not contain any hazardous ingredients at or above regulated thresholds

3. Hazards identification

This material is not considered to be hazardous but should be handled by good industrial hygiene and safety practices.

4. First-aid measures

a. Eyes
I. Wash the eye thoroughly with copious quantities of water, ensuring eyelids are held open.
Obtain medical advice if any pain or redness develops or persists.
b Skin
I. Wash skin thoroughly with soap and water as soon as reasonably practicable. Remove
heavily contaminated clothing and wash underlying skin.
c. Ingestion
I. If contamination of the mouth occurs, wash out thoroughly with water. Except as a deliberate
act, the ingestion of large amounts of product is unlikely. If it should occur, do not induce
vomiting; obtain medical advice
d. Inhalation
I. If inhalation of mists, fumes or vapor causes irritation to the nose or throat, or coughing,
remove to fresh air. If symptoms persist obtain medical advice.
e. Medical Advice
I. Treatment should in general be symptomatic and directed to relieving any effects.

5. Fire-fighting measures

Use foam, dry powder, or water fog. DO NOT USE water jets. Fires in confined spaces should be dealt with by trained personnel wearing approved breathing apparatus. Water may be used to cool nearby heat-exposed areas/objects/packages. Avoid spraying directly into storage containers because of the danger of boil-over.
Combustion Products: Toxic fumes may be evolved on burning or exposure to heat.

6. Accidental release measures

• Contain and recover spilled material using sand or other suitable inert absorbent material.
• It is advised that stocks of suitable absorbent material should be held in quantities sufficient to deal with any spillage, which may be reasonably anticipated.
• Spilled material may make surfaces slippery.
• Protect drains from potential spills to minimize contamination. Do not wash the product into the drainage system.
• In the case of large spills contact the appropriate authorities.
• In the case of spillage on water, prevent the spread of product by the use of a suitable barrier
• equipment. Recover product from the surface. Protect environmentally sensitive areas and water supplies.

7. Handling and storage

• Handling Precautions
• Avoid contact with eyes. If splashing is likely to occur wear a full face visor or chemical goggles as appropriate.
• Avoid frequent or prolonged skin contact with fresh or used products. Good working practices, high standards of personal hygiene and plant cleanliness must be maintained at all times.
• Wash hands thoroughly after contact.
• Use disposable cloths and discard them when soiled. Do not put soiled clothes into pockets.
  Fire Prevention
• Product-contaminated rags; paper or material used to absorb spillages, represent a fire hazard, and should not be allowed to accumulate. Dispose of it safely immediately after use.
  Storage Conditions
• Store under cover away from heat and sources of ignition.

8. Exposure controls / personal protection

Exposure Limits

• There is no appropriate occupational exposure limit for this material.
• Ensure good ventilation.
• Avoid, as far as reasonably practicable, inhalation of vapor, mists, or fumes generated during use.
• If vapor, mists, or fumes are generated, their concentration in the workplace air should be controlled to the lowest reasonably practicable level.

Protective Clothing

• Wear face visors or goggles in circumstances where eye contact can accidentally occur.
• If skin contact is likely, wear impervious protective clothing and/or gloves.
• Protective clothing should be regularly dry cleaned. Change heavily contaminated clothing as soon as reasonably practicable; dry clean, launder, and preferably starch before re-use. Wash any contaminated underlying skin with soap and water.

Respiratory Protection

• Respiratory protection is unnecessary, provided the concentration of vapor, mists or fumes is adequately controlled.
• The use of respiratory equipment must be strictly in accordance with the manufacturers’ instructions and any statutory requirements governing its selection and use